Protective display case for Star Trek Playmate figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Star Trek Playmate Case for Carded Figures

Similar to the Star Case, this is the best protection you can buy for your Playmate figures. Out of stock for months, because the original mold was deteriorating, and cases made from that mold were not the normal quality Protech wants to put their name on, we invested in enough cases to convince the factory to rework the mold to again produce high quality Playmate cases.

Dimensions: 7 5/8' wide x 10 1/4' high x 2 1/8' deep.

Features: acid free, 25 mil construction, hang tab for wall mounting."

Deluxe wall hanging case for 24 loose action figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Loose Action Figure Display Case

This beautiful case is made of ABS plastic, painted black, and finished off by a sliding acrylic front cover (slides to the left or to the right, depending on how you position the case).

Each compartment is the same size (2.1' wide x 4.9' high x 2.1' deep) and has an individual mirror back. The action figures can be mounted onto our action figure stands (sold separately) for stability.

Dimensions: 18' wide x 15.5' high x 2.625' deep. Features predrilled holes for wall hanging. Holds 24 figures. Figures in picture are not included."

Deluxe acrylic cases for Masters of the Universe figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Acrylic Case for Carded Masters of the Universe Figures

Finally, the much requested case for your rare and expensive MOTU figures is in stock in very limited quantities. These cases are the best solution for those high dollar key pieces. Hand made, they'll show off your prized carded figures in style.

Dimensions: 7 1/2' wide, 12' tall, and 3 1/4' deep.

Features: acid free, 1/4' solid acrylic design, crystal clear, will never yellow, hang tab for wall mounting. You simply slide the card between the side rails and the back of the case, then fit the base into the top dome and slide the locking mechanism shut to securely hold your figure air-tight."

Deluxe acrylic case for carded Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Acrylic Case for Carded Star Wars Figures

These cases are for vintage and new Star Wars Figures. These cases are the best solution for those high dollar key pieces. Hand made of crystal clear acrylic.

Dimensions: 6 1/8' wide, 9' tall, and 2 1/2' deep, these will hold all the vintage figures as well as the newest ones including the AOTC figures with deeper bubbles (will not fit Ephant Mon).

Features: acid free, 1/4' solid acrylic design, crystal clear, will never yellow, hang tab for wall mounting."

Loose action figure stand up cases

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stand Up Display Case

These cases are designed to go hand and hand with the Loose Action Figure Stands (see above). All you have to do is place an action figure on a ProTech action figure stand and then stand them in the loose stand up case. These hard, poly-styrene design cases will provide easy viewing and protection.

The stands that allow the figures to stand up straight are sold separately, see above for stands for vintage figures, or stands for newer figures.

Dimensions: 4 3/4' high, 2 1/2' diameter.

Features: acid free, crystal clear, stackable."

Loose action figure blisters - large

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Blister - Large

The large size, single piece design Large Action Figure Blisters works well with larger sized vintage figures, POTF2 figures, and Episode I figures.

Dimensions: 4 1/2' long, 2 1/4' wide, and 1 1/4' deep (inner dimenstions)

Features: acid free, hang tab for wall mounting."

Loose action figure blisters - small

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Blister - Small

The small size, single piece design Small Action Figure Blisters works well with many of the vintage action figures.
These are also a good holder for standard size PEZ containers.

Dimensions: 4 1/2' long, 1 1/2' wide, and 1 1/4' deep (inner dimensions)

Features: acid free, hang tab for wall mounting."

Loose action figure stands for GI Joe figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for GI Joe Figures

These action figure stands are designed for use with all 3.75' GI Joe figures. These stands work by placing the figures on the peg of the stand. Although the peg for the foot hole is the same size as the peg on the Star Wars vintage stands (which also can be used for GI Joe figures), the peg on the stand designed for GI Joes is placed closer to the center.

These stands may also work with many other action figures. If you know of any other figures that will work with these stands, please report it to us by email and we'll list it here so that your fellow collectors can benefit.
Now available in clear only.

Dimensions: 2' diameter.

Features: acid free, archival safe."

Loose action figure stands for newer Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for POTF2 Figures (1995+)

These action figure stands are designed for use with newer, POTF2 Star Wars figures. These stands work by placing the figure on the peg of the stand. These stands work well by themselves or with our loose action figure stand up cases (see below). Also available in vintage version with larger pegs.

Dimensions: 2' diameter, the peg on these stands is 3/32nd of an inch in diameter.

Features: acid free."

Loose action figure stands for Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for Vintage Figures (1977 to 1994)

These action figure stands are designed for use with all vintage Star Wars figures. These stands work by placing the vintage figures on the peg of the stand.

These stands work well by themselves or with our loose action figure stand up cases (see below). Also available in POTF2 version with smaller pegs.

These stands may also work with many other action figures. So far we've been told that these stands (in the vintage size) work for GI Joe 3 3/4' figures, and Super Powers figures. If you know of any other figures that will work with these stands, please report it to us by email and we'll list it here so that your fellow collectors can benefit.

Now available in clear, as well as the original black.

Dimensions: 2' diameter, the peg on these stands is 1/8th of an inch in diameter.

Features: acid free."