ProTech Hot Wheels Supplies - Car Cases - space saver style

ProTech Hot Wheels Supplies - Car Cases: "Carded Hot Wheels Cases - Space Saver Design (new style)

These Space Saver Carded Hot Wheels cases are designed to protect the entire card and blister of a single Hot Wheels or Matchbox car. These are designed to be stackable and take up less space than the Original Design. We have been told that the Maisto Marvel carded cars will fit well in this case, also.

This new style was designed based on customer feedback. The bubble is slightly thinner, and shorter from top to bottom, giving a more streamlined look and feel. The bubble is also slightly wider, and will accommodate some cars, including Japanese HW cars, that used to present a problem.

Dimensions: 4 1/4' long, 6 1/2' high, and 1.5' deep.

Features: acid free, 25 mil construction, crystal clear, hang tab for wall mounting."

ProTech Hot Wheels Supplies - Car Cases - original style with full bubble

ProTech Hot Wheels Supplies - Car Cases: "Carded Hot Wheels Cases - Original Design

These Original Carded Hot Wheels cases are designed to protect the entire card and blister of a single Hot Wheels or Matchbox car. These are also a perfect case to protect your loose Masters of the Universe figures!
Dimensions: 4 1/4' long, 6 1/2' high, and 1 5/8' deep.

Features: acid free, 25 mil construction, crystal clear, hang tab for wall mounting."

Deluxe loose car cases for loose 1/64 scale cars

ProTech Hot Wheels Supplies - Car Cases: "Deluxe Loose Car Cases (164-C) for Loose Hot Wheels and other 1/64 scale cars

These deluxe loose car display cases are designed to fit loose 1/64 scale Hot Wheels and other die cast items. Check the dimensions, they are a bit smaller than the Protech FV-2 case listed above. These are made of a hard, mold-injected styrene plastic. You can purchase these either as a completely clear case, or with a mirror. The mirror can either be the base (in which case the cases is stackable as shown in the picture to the right), or can be turned and used as a mirror back.

Dimensions: 3 1/2' long, 1 3/4' wide, and 1 5/8' high.

Features: acid free, mirrored base, beveled edges, stackable, made in the U.S.A."

Economical soft shell blisters for Hot Wheels carded cars

ProTech Hot Wheels Supplies - Car Cases: "Loose Car Blisters for Loose Hot Wheels

These loose car blisters are designed to fit loose 1/64 scale Hot Wheels and other die cast items.
Dimensions: 3 1/4' long, 1 1/2' high, and 1 1/2' deep.

Features: acid free, 25 mil construction, hang tab for wall mounting."

Deluxe mirrored display case for single loose Hot Wheels or Matchbox card

ProTech Hot Wheels Supplies - Car Cases: "Deluxe mirrored display case (FV-2) (for single loose HW/MBX cars)

This is a beautiful display case meant to display your loose 1/64 scale cars. They are made by Protech of hard, mold-injected plastic and have a mirrored base. Dimensions: 4.25' long, 2.25' wide, 2' high. Please also consider the loose car stands pictured toward the bottom of this page, they fit perfectly inside this case and prevent the cars from moving around."

ProTech car cases for limited edition carded cars

ProTech Hot Wheels Supplies - Car Cases: "Carded Hot Wheels Cases - Limited Edition

These carded car cases are designed to fit the entire boxed Limited including J.C. Whitney and similar cars. This case will securely fit many different sized boxed cars. This case will not work for the Hot Wheels Collectibles with the plastic display case.

Dimensions: 5' wide, 5.25' high, 2 1/8' deep.

Features: acid free, 25 mil construction, crystal clear, hang tab for wall mounting."

ProTech Vintage case to hold individual carded Hot Wheels Redline cars

ProTech Hot Wheels Supplies - Car Cases: "Carded Hot Wheels Cases - Vintage Edition

These carded car cases are designed to fit vintage Hot Wheels still on the card. They work for the Vintage Red Line or Red Line Reproduction. This is case is made to fit the blister card exactly and will not allow the car to slide around in the case like some other cases.

Dimensions: 5.75' wide x 6' high x 1.25' deep

Features: acid free, 25 mil construction, crystal clear, hang tab for wall mounting. "

ProTech 4-car stacker to hold 4 carded Hot Wheels or Matchbox card

ProTech Hot Wheels Supplies - Car Cases: "The '4-car Stacker'!

Protect/display 4 cars in one compact holder! This patented design accommodates a 4-car HW series in style. Each car sits in its own independent compartment.

Dimensions: External dimensions are 5.5' wide x 15.5' high x 1.75' deep (the compartment bubbles), this is smaller in terms of square inches than the 4x4 (see below) to save space! Internal well (where the cards and cars sit) dimensions are 4.25' wide x 14' high x 1 5/8' deep. Each compartment (where the bubble goes) is 2 1/8' from top to bottom.

Features: acid free, archival safe, beautifully clear, 25 mil construction, hang tab for wall mounting."

ProTech 5-car stacker to hold 5 carded Hot Wheels or Matchbox cars

ProTech Hot Wheels Supplies - Car Cases: "The patented '5-car Stacker'!

Protect/display 5 cars in one compact holder! This patented design accommodates a 5-car HW series in style. Each car sits in its own independent compartment.

Dimensions: External dimensions are 6' wide x 18' high x 1.75' deep (the compartment bubbles), this is smaller in terms of square inches than the 4x4 (see below) even though the 5-car stacker holds an extra car! Internal well (where the cards and cars sit) dimensions are 4.25' wide x 16.25' high x 1 5/8' deep. Each compartment (where the bubble goes) is 2 1/8' from top to bottom.

Features: acid free, archival safe, beautifully clear, 25 mil construction, hang tab for wall mounting."

Protective display case for Star Trek Playmate figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Star Trek Playmate Case for Carded Figures

Similar to the Star Case, this is the best protection you can buy for your Playmate figures. Out of stock for months, because the original mold was deteriorating, and cases made from that mold were not the normal quality Protech wants to put their name on, we invested in enough cases to convince the factory to rework the mold to again produce high quality Playmate cases.

Dimensions: 7 5/8' wide x 10 1/4' high x 2 1/8' deep.

Features: acid free, 25 mil construction, hang tab for wall mounting."

Deluxe wall hanging case for 24 loose action figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Loose Action Figure Display Case

This beautiful case is made of ABS plastic, painted black, and finished off by a sliding acrylic front cover (slides to the left or to the right, depending on how you position the case).

Each compartment is the same size (2.1' wide x 4.9' high x 2.1' deep) and has an individual mirror back. The action figures can be mounted onto our action figure stands (sold separately) for stability.

Dimensions: 18' wide x 15.5' high x 2.625' deep. Features predrilled holes for wall hanging. Holds 24 figures. Figures in picture are not included."

Deluxe acrylic cases for Masters of the Universe figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Acrylic Case for Carded Masters of the Universe Figures

Finally, the much requested case for your rare and expensive MOTU figures is in stock in very limited quantities. These cases are the best solution for those high dollar key pieces. Hand made, they'll show off your prized carded figures in style.

Dimensions: 7 1/2' wide, 12' tall, and 3 1/4' deep.

Features: acid free, 1/4' solid acrylic design, crystal clear, will never yellow, hang tab for wall mounting. You simply slide the card between the side rails and the back of the case, then fit the base into the top dome and slide the locking mechanism shut to securely hold your figure air-tight."

Deluxe acrylic case for carded Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Deluxe Acrylic Case for Carded Star Wars Figures

These cases are for vintage and new Star Wars Figures. These cases are the best solution for those high dollar key pieces. Hand made of crystal clear acrylic.

Dimensions: 6 1/8' wide, 9' tall, and 2 1/2' deep, these will hold all the vintage figures as well as the newest ones including the AOTC figures with deeper bubbles (will not fit Ephant Mon).

Features: acid free, 1/4' solid acrylic design, crystal clear, will never yellow, hang tab for wall mounting."

Loose action figure stand up cases

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stand Up Display Case

These cases are designed to go hand and hand with the Loose Action Figure Stands (see above). All you have to do is place an action figure on a ProTech action figure stand and then stand them in the loose stand up case. These hard, poly-styrene design cases will provide easy viewing and protection.

The stands that allow the figures to stand up straight are sold separately, see above for stands for vintage figures, or stands for newer figures.

Dimensions: 4 3/4' high, 2 1/2' diameter.

Features: acid free, crystal clear, stackable."

Loose action figure blisters - large

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Blister - Large

The large size, single piece design Large Action Figure Blisters works well with larger sized vintage figures, POTF2 figures, and Episode I figures.

Dimensions: 4 1/2' long, 2 1/4' wide, and 1 1/4' deep (inner dimenstions)

Features: acid free, hang tab for wall mounting."

Loose action figure blisters - small

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Blister - Small

The small size, single piece design Small Action Figure Blisters works well with many of the vintage action figures.
These are also a good holder for standard size PEZ containers.

Dimensions: 4 1/2' long, 1 1/2' wide, and 1 1/4' deep (inner dimensions)

Features: acid free, hang tab for wall mounting."

Loose action figure stands for GI Joe figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for GI Joe Figures

These action figure stands are designed for use with all 3.75' GI Joe figures. These stands work by placing the figures on the peg of the stand. Although the peg for the foot hole is the same size as the peg on the Star Wars vintage stands (which also can be used for GI Joe figures), the peg on the stand designed for GI Joes is placed closer to the center.

These stands may also work with many other action figures. If you know of any other figures that will work with these stands, please report it to us by email and we'll list it here so that your fellow collectors can benefit.
Now available in clear only.

Dimensions: 2' diameter.

Features: acid free, archival safe."

Loose action figure stands for newer Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for POTF2 Figures (1995+)

These action figure stands are designed for use with newer, POTF2 Star Wars figures. These stands work by placing the figure on the peg of the stand. These stands work well by themselves or with our loose action figure stand up cases (see below). Also available in vintage version with larger pegs.

Dimensions: 2' diameter, the peg on these stands is 3/32nd of an inch in diameter.

Features: acid free."

Loose action figure stands for Star Wars figures

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.:

"Loose Action Figure Stands for Vintage Figures (1977 to 1994)

These action figure stands are designed for use with all vintage Star Wars figures. These stands work by placing the vintage figures on the peg of the stand.

These stands work well by themselves or with our loose action figure stand up cases (see below). Also available in POTF2 version with smaller pegs.

These stands may also work with many other action figures. So far we've been told that these stands (in the vintage size) work for GI Joe 3 3/4' figures, and Super Powers figures. If you know of any other figures that will work with these stands, please report it to us by email and we'll list it here so that your fellow collectors can benefit.

Now available in clear, as well as the original black.

Dimensions: 2' diameter, the peg on these stands is 1/8th of an inch in diameter.

Features: acid free."

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.: "'Star Case Deluxe' for Deluxe AOTC figures!

This case will display and protect the bigger Deluxe Action Figure Collection figures. This case is the exact same great quality as the original ProTech Star Case, the only difference is the size.

Some of the earlier deluxe figures (prior to AOTC) come on a different size card, and might not fit into this holder. Measure your card to be sure this case will work.

Dimensions: 8' wide, 9' high, 2 3/4' deep (inner dimensions, where the card rests)

Features: acid free, 25 mil construction, hang tab for wall mounting."

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.: "'Star Case 2' for figures with the bigger bubbles!

This case will hold and protect all vintage and current star wars figures, including the ones with the deeper bubbles (Destroyer Droid and some of the new AOTC and Saga figures need the deeper bubble of this Star Case 2, all older figures can fit into the original Star Case above, as well as this holder).

This case is the exact same great quality as the original ProTech Star Case, the only difference is the deeper bubble to hold the thicker figures. These cases are the best protective cases you can buy on the market today.

Dimensions: 9' long, 6' wide, and 2 5/8' deep (inner dimensions, where the card rests)

Features: acid free, 25 mil construction, hang tab for wall mounting."

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.

Star Wars Supplies from ProTech Products - Protective display cases for Star Wars, GI Joe, and Star Trek carded or loose action figures.: "Star Case for Carded Star Wars Figures

Our #1 Selling Item!

This is the original ProTech Star Case, the exact same one hundreds of the top dealers in the country use when shipping out valuable figures, the same one thousands upon thousands of savvy collectors use to protect their carded figures from destructive forces.

You too can protect your figures from the ravages of dust, moisture, mites, and touching. You can even hang your figures without fear of ripping the original card once they are securely placed inside the Star Case.
The crystal clarity of the ProTech cases (these and the ones below) let the colors and details of your figures shine through, these cases are made of virgin plastic (unlike some other imitations).

These cases are the best protective cases you can buy on the market today. These cases work for all vintage and current Star Wars figures, except for the ones with the larger (deeper) bubbles like Destroyer Droid and some of the new AOTC and Saga figures. For those, use the 'Star Case 2' below. These also fit (we have been told): G.I. Joe, Battlestar Galactica, Buck Rogers, Clash of the Titans, and Mego 3.75 inch figures.

Dimensions: 9' long, 6' wide, and 2 1/4' deep (inner dimensions where the card sits)

Features: acid free, 25 mil construction, two-piece design resists crushing, hang tab for wall mounting. "

Introduction to the Protective Display Cases Blog

This blog will show you all the different types of display cases we carry on our main site, which is: WholesaleCases.com

We have a tremendous array of quality display cases, and collectors often don't realize all that's available, even our regular customers send us emails asking why we don't carry something for one of their hobbies, and often times we do!

So check out our archives as we build up the list of pages in our site, maybe you'll find something you can use.